Файловый менеджер

Файловый менеджер - Редактировать - /usr/bin/gettextize

Назад
#! /bin/sh # # Copyright (C) 1995-1998, 2000-2016 Free Software Foundation, Inc. # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # # This file is meant for authors or maintainers which want to # internationalize their package with the help of GNU gettext. For # further information how to use it consult the GNU gettext manual. progname=$0 package=gettext-tools version=0.19.8.1 archive_version=0.19.8 # Set variables # - gettext_datadir directory where the data files are stored. prefix="/usr" datarootdir="${prefix}/share" : ${gettext_datadir="/usr/share/gettext"} : ${AUTOM4TE=autom4te} # func_tmpdir # creates a temporary directory. # Sets variable # - tmp pathname of freshly created temporary directory func_tmpdir () { # Use the environment variable TMPDIR, falling back to /tmp. This allows # users to specify a different temporary directory, for example, if their # /tmp is filled up or too small. : ${TMPDIR=/tmp} { # Use the mktemp program if available. If not available, hide the error # message. tmp=`(umask 077 && mktemp -d "$TMPDIR/gtXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } \|\| { # Use a simple mkdir command. It is guaranteed to fail if the directory # already exists. $RANDOM is bash specific and expands to empty in shells # other than bash, ksh and zsh. Its use does not increase security; # rather, it minimizes the probability of failure in a very cluttered /tmp # directory. tmp=$TMPDIR/gt$$-$RANDOM (umask 077 && mkdir "$tmp") } \|\| { echo "$0: cannot create a temporary directory in $TMPDIR" >&2 { (exit 1); exit 1; } } } # Support for relocatability. func_find_curr_installdir () { # Determine curr_installdir, even taking into account symlinks. curr_executable="$0" case "$curr_executable" in / \| \\) ;; ) # Need to look in the PATH. save_IFS="$IFS"; IFS="${PATH_SEPARATOR=':'}" for dir in $PATH; do IFS="$save_IFS" test -z "$dir" && dir=. for exec_ext in ''; do if test -f "$dir/$curr_executable$exec_ext"; then curr_executable="$dir/$curr_executable$exec_ext" break 2 fi done done IFS="$save_IFS" ;; esac # Make absolute. case "$curr_executable" in / \| ?:/* \| ?:\\) ;; ) curr_executable=`pwd`/"$curr_executable" ;; esac # Resolve symlinks. sed_dirname='s,/[^/]$,,' sed_linkdest='s,^. -> $.$,\1,p' while : ; do lsline=`LC_ALL=C ls -l "$curr_executable"` case "$lsline" in " -> ") linkdest=`echo "$lsline" \| sed -n -e "$sed_linkdest"` case "$linkdest" in / \| ?:/* \| ?:\\) curr_executable="$linkdest" ;; ) curr_executable=`echo "$curr_executable" \| sed -e "$sed_dirname"`/"$linkdest" ;; esac ;; ) break ;; esac done curr_installdir=`echo "$curr_executable" \| sed -e 's,/[^/]$,,'` # Canonicalize. curr_installdir=`cd "$curr_installdir" && pwd` } func_find_prefixes () { # Compute the original/current installation prefixes by stripping the # trailing directories off the original/current installation directories. orig_installprefix="$orig_installdir" curr_installprefix="$curr_installdir" while true; do orig_last=`echo "$orig_installprefix" \| sed -n -e 's,^./$[^/]$$,\1,p'` curr_last=`echo "$curr_installprefix" \| sed -n -e 's,^./$[^/]$$,\1,p'` if test -z "$orig_last" \|\| test -z "$curr_last"; then break fi if test "$orig_last" != "$curr_last"; then break fi orig_installprefix=`echo "$orig_installprefix" \| sed -e 's,/[^/]$,,'` curr_installprefix=`echo "$curr_installprefix" \| sed -e 's,/[^/]$,,'` done } if test "no" = yes; then exec_prefix="/usr" bindir="/usr/bin" orig_installdir="$bindir" # see Makefile.am's _SCRIPTS variables func_find_curr_installdir # determine curr_installdir func_find_prefixes # Relocate the directory variables that we use. gettext_datadir=`echo "$gettext_datadir/" \| sed -e "s%^${orig_installprefix}/%${curr_installprefix}/%" \| sed -e 's,/$,,'` fi # func_trace_autoconf macro configure.ac # traces an Autoconf macro call and outputs the arguments to stdout, # using autom4te. func_trace_autoconf () { echo '\ dnl replace macros which may abort autom4te with a no-op variant m4_pushdef([m4_assert]) m4_pushdef([m4_fatal]) m4_pushdef([m4_warn]) m4_pushdef([m4_errprintn]) m4_pushdef([m4_exit]) m4_pushdef([m4_include]) m4_pushdef([m4_esyscmd]) ' \ \| "$AUTOM4TE" --no-cache --language=Autoconf-without-aclocal-m4 \ --trace="$1":\$% - "$2" 2>/dev/null } # func_trace_sed macro configure.ac # traces an Autoconf macro call and outputs the arguments to stdout, # using sed. func_trace_sed () { sed_extract_arguments=' s,#.$,,; s,^dnl .$,,; s, dnl .$,,; /'"$1"'(/ { ta :a s/)/)/ tb s/\\$// N ba :b s,^.'"$1"'([[ ]$[^]"$`\$]\).$,\1,p } d' sed -e "$sed_extract_arguments" "$2" } # func_usage # outputs to stdout the --help usage message. func_usage () { echo "\ Usage: gettextize [OPTION]... [package-dir] Prepares a source package to use gettext. Options: --help print this help and exit --version print version information and exit -f, --force force writing of new files even if old exist --intl install libintl in a subdirectory (deprecated) --po-dir=DIR specify directory with PO files --no-changelog don't update or create ChangeLog files --symlink make symbolic links instead of copying files -n, --dry-run print modifications but don't perform them Report bugs to <bug-gnu-gettext@gnu.org>." } # func_version # outputs to stdout the --version message. func_version () { echo "$progname (GNU $package) $version" echo "Copyright (C) 1995-1998, 2000-2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law." echo "Written by" "Ulrich Drepper" } # func_fatal_error message # outputs to stderr a fatal error message, and terminates the program. func_fatal_error () { echo "gettextize: * $1" 1>&2 echo "gettextize: * Stop." 1>&2 exit 1 } # Nuisances. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS # Command-line option processing. # Removes the OPTIONS from the arguments. Sets the variables: # - force 1 if --force was given, 0 otherwise # - intldir yes if --intl was given, empty otherwise # - podirs list of directories specified with --po-dir # - try_ln_s : if --symlink was given, false otherwise # - do_changelog false if --no-changelog was given, : otherwise # - doit false if --dry-run was given, : otherwise { force=0 intldir= podirs= try_ln_s=false do_changelog=: doit=: while test $# -gt 0; do case "$1" in -c \| --copy \| --cop \| --co \| --c ) # accepted for backward compatibility shift ;; -n \| --dry-run \| --dry-ru \| --dry-r \| --dry- \| --dry \| --dr \| --d ) shift doit=false ;; -f \| --force \| --forc \| --for \| --fo \| --f ) shift force=1 ;; --help \| --hel \| --he \| --h ) func_usage; exit 0 ;; --intl \| --int \| --in \| --i ) shift intldir=yes ;; --po-dir \| --po-di \| --po-d \| --po- \| --po \| --p ) shift if test $# = 0; then func_fatal_error "missing argument for --po-dir" fi case "$1" in -) func_fatal_error "missing argument for --po-dir" ;; esac podirs="$podirs $1" shift ;; --po-dir= ) arg=`echo "X$1" \| sed -e 's/^X--po-dir=//'` podirs="$podirs $arg" shift ;; --no-changelog \| --no-changelo \| --no-changel \| --no-change \| --no-chang \| --no-chan \| --no-cha \| --no-ch \| --no-c ) shift do_changelog=false ;; --symlink \| --symlin \| --symli \| --syml \| --sym \| --sy \| --s ) shift try_ln_s=: ;; --version \| --versio \| --versi \| --vers \| --ver \| --ve \| --v ) func_version exit 0 ;; -- ) # Stop option prcessing shift; break ;; -* ) echo "gettextize: unknown option $1" 1>&2 echo "Try 'gettextize --help' for more information." 1>&2 exit 1 ;; * ) break ;; esac done # podirs defaults to "po". test -n "$podirs" \|\| podirs="po" } # Warn about deprecated options. if test -n "$intldir"; then echo "gettextize: warning: the option '--intl' is deprecated and will be removed" 1>&2 fi # Command-line argument processing. # Analyzes the remaining arguments. # Sets the variables # - origdir to the original directory, # - srcdir to the package directory, and cd-s into it. { if test $# -gt 1; then func_usage 1>&2 exit 1 fi origdir=`pwd` if test $# -eq 1; then srcdir=$1 if cd "$srcdir"; then srcdir=`pwd` else func_fatal_error "Cannot change directory to '$srcdir'." fi else srcdir=$origdir fi } # The current directory is now $srcdir. # Check integrity of package: A configure.in/ac must be present. Sets variable # - configure_in name of configure.in/ac file. test -f configure.in \|\| test -f configure.ac \|\| func_fatal_error "Missing configure.in or configure.ac, please cd to your package first." configure_in=NONE if test -f configure.in; then configure_in=configure.in else if test -f configure.ac; then configure_in=configure.ac fi fi # Check whether the --force option is needed but has not been specified. if test $force -eq 0; then if test -d intl; then func_fatal_error "intl/ subdirectory exists: use option -f if you really want to delete it." fi for podir in $podirs; do if test -f "$podir/Makefile.in.in"; then func_fatal_error "$podir/Makefile.in.in exists: use option -f if you really want to delete it." fi done if test -f ABOUT-NLS; then func_fatal_error "ABOUT-NLS exists: use option -f if you really want to delete it." fi fi # Select the method for Autoconf macro tracing. func_trace_autoconf # is more accurate than func_trace_sed, but it only works with # autoconf >= 2.69. if echo "AC_PREREQ([2.69])" \ \| "$AUTOM4TE" --no-cache --language=Autoconf-without-aclocal-m4 - 2>&1; then func_trace=func_trace_autoconf else func_trace=func_trace_sed fi # Check in which directory config.rpath etc. belong. auxdir=`"$func_trace" AC_CONFIG_AUX_DIR "$configure_in"` if test -n "$auxdir"; then auxdir="$auxdir/" fi # Check in which directory gettext.m4 etc. belong. macrodirs=`"$func_trace" AC_CONFIG_MACRO_DIR_TRACE "$configure_in"` if test -z "$macrodirs"; then macrodirs=`"$func_trace" AC_CONFIG_MACRO_DIR "$configure_in"` fi for arg in $macrodirs; do m4dir="$arg" break done # For simplicity we change to the gettext source directory. cd "$gettext_datadir" \|\| func_fatal_error "gettext source directory '${gettext_datadir}' doesn't exist" # Variables which keep track what has been modified. added_directories= removed_directory= added_extradist= added_acoutput= removed_acoutput=" intl/intlh.inst" # Variable: # - please accumulates instructions for the user. please= # Variable: # - date current date, for use in ChangeLog entries. date=`date +%Y-%m-%d` # func_copy from to # copies a file. # 'from' is a relative pathname, relative to the current directory. # 'to' is a relative pathname, relative to $srcdir. func_copy () { if $doit; then rm -f "$srcdir/$2" echo "Copying file $2" cp "$1" "$srcdir/$2" else echo "Copy file $2" fi } # func_linkorcopy from absfrom to # links or copies a file. # 'from' is a relative pathname, relative to the current directory. # 'absfrom' is the corresponding absolute pathname. # 'to' is a relative pathname, relative to $srcdir. func_linkorcopy () { if $doit; then rm -f "$srcdir/$3" ($try_ln_s && ln -s "$2" "$srcdir/$3" && echo "Symlinking file $3") 2>/dev/null \|\| { echo "Copying file $3"; cp "$1" "$srcdir/$3"; } else if $try_ln_s; then echo "Symlink file $3" else echo "Copy file $3" fi fi } # func_backup to # makes a backup of a file that is about to be overwritten or replaced. # 'to' is a relative pathname, relative to $srcdir. func_backup () { if $doit; then if test -f "$srcdir/$1"; then rm -f "$srcdir/$1~" cp -p "$srcdir/$1" "$srcdir/$1~" fi fi } # func_remove to # removes a file. # 'to' is a relative pathname, relative to $srcdir. func_remove () { if $doit; then echo "Removing $1" rm -f "$srcdir/$1" else echo "Remove $1" fi } # func_ChangeLog_init # func_ChangeLog_add_entry line # func_ChangeLog_finish # manage the ChangeLog file, relative to $srcdir. func_ChangeLog_init () { modified_ChangeLog= } func_ChangeLog_add_entry () { if $doit; then if test -z "$modified_ChangeLog"; then echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/ChangeLog.tmp" echo >> "$srcdir/ChangeLog.tmp" modified_ChangeLog=yes fi echo "$1" >> "$srcdir/ChangeLog.tmp" else modified_ChangeLog=yes fi } func_ChangeLog_finish () { if test -n "$modified_ChangeLog"; then if $doit; then echo >> "$srcdir/ChangeLog.tmp" if test -f "$srcdir/ChangeLog"; then echo "Adding an entry to ChangeLog (backup is in ChangeLog~)" cat "$srcdir/ChangeLog" >> "$srcdir/ChangeLog.tmp" rm -f "$srcdir/ChangeLog~" cp -p "$srcdir/ChangeLog" "$srcdir/ChangeLog~" else echo "Creating ChangeLog" fi cp "$srcdir/ChangeLog.tmp" "$srcdir/ChangeLog" rm -f "$srcdir/ChangeLog.tmp" else if test -f "$srcdir/ChangeLog"; then echo "Add an entry to ChangeLog" else echo "Create ChangeLog" fi fi fi } # func_poChangeLog_init # func_poChangeLog_add_entry line # func_poChangeLog_finish # manage the $podir/ChangeLog file, relative to $srcdir. func_poChangeLog_init () { modified_poChangeLog= } func_poChangeLog_add_entry () { if $doit; then if test -z "$modified_poChangeLog"; then echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/$podir/ChangeLog.tmp" echo >> "$srcdir/$podir/ChangeLog.tmp" modified_poChangeLog=yes fi echo "$1" >> "$srcdir/$podir/ChangeLog.tmp" else modified_poChangeLog=yes fi } func_poChangeLog_finish () { if test -n "$modified_poChangeLog"; then if $doit; then echo >> "$srcdir/$podir/ChangeLog.tmp" if test -f "$srcdir/$podir/ChangeLog"; then echo "Adding an entry to $podir/ChangeLog (backup is in $podir/ChangeLog~)" cat "$srcdir/$podir/ChangeLog" >> "$srcdir/$podir/ChangeLog.tmp" rm -f "$srcdir/$podir/ChangeLog~" cp -p "$srcdir/$podir/ChangeLog" "$srcdir/$podir/ChangeLog~" else echo "Creating $podir/ChangeLog" fi cp "$srcdir/$podir/ChangeLog.tmp" "$srcdir/$podir/ChangeLog" rm -f "$srcdir/$podir/ChangeLog.tmp" else if test -f "$srcdir/$podir/ChangeLog"; then echo "Add an entry to $podir/ChangeLog" else echo "Create $podir/ChangeLog" fi fi fi } # func_m4ChangeLog_init # func_m4ChangeLog_add_entry line # func_m4ChangeLog_finish # manage the $m4dir/ChangeLog file, relative to $srcdir. func_m4ChangeLog_init () { if test -n "$using_m4ChangeLog"; then modified_m4ChangeLog= created_m4ChangeLog= fi } func_m4ChangeLog_add_entry () { if test -n "$using_m4ChangeLog"; then if $doit; then if test -z "$modified_m4ChangeLog"; then echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/$m4dir/ChangeLog.tmp" echo >> "$srcdir/$m4dir/ChangeLog.tmp" modified_m4ChangeLog=yes fi echo "$1" >> "$srcdir/$m4dir/ChangeLog.tmp" else modified_m4ChangeLog=yes fi else line="$1" line=`echo "$line" \| sed -e "s%^ \\* % * $m4dir/%"` func_ChangeLog_add_entry "$line" fi } func_m4ChangeLog_finish () { if test -n "$using_m4ChangeLog"; then if test -n "$modified_m4ChangeLog"; then if $doit; then echo >> "$srcdir/$m4dir/ChangeLog.tmp" if test -f "$srcdir/$m4dir/ChangeLog"; then echo "Adding an entry to $m4dir/ChangeLog (backup is in $m4dir/ChangeLog~)" cat "$srcdir/$m4dir/ChangeLog" >> "$srcdir/$m4dir/ChangeLog.tmp" rm -f "$srcdir/$m4dir/ChangeLog~" cp -p "$srcdir/$m4dir/ChangeLog" "$srcdir/$m4dir/ChangeLog~" else echo "Creating $m4dir/ChangeLog" created_m4ChangeLog=yes fi cp "$srcdir/$m4dir/ChangeLog.tmp" "$srcdir/$m4dir/ChangeLog" rm -f "$srcdir/$m4dir/ChangeLog.tmp" else if test -f "$srcdir/$m4dir/ChangeLog"; then echo "Add an entry to $m4dir/ChangeLog" else echo "Create $m4dir/ChangeLog" created_m4ChangeLog=yes fi fi fi fi } using_m4ChangeLog=yes if test ! -f "$srcdir/intl/Makefile.in" && test -n "$intldir"; then added_acoutput="$added_acoutput intl/Makefile" fi if test -f "$srcdir/intl/Makefile.in" && test -z "$intldir"; then removed_acoutput="$removed_acoutput intl/Makefile" fi if test -d "$srcdir/intl"; then # Remove everything inside intl except for RCS and CVS subdirs and invisible # files. if $doit; then echo "Wiping out intl/ subdirectory" (cd "$srcdir/intl" && for f in ; do if test CVS != "$f" && test RCS != "$f"; then rm -rf "$f" fi done) else echo "Wipe out intl/ subdirectory" fi if test -z "$intldir"; then removed_directory=intl fi else if test -n "$intldir"; then if $doit; then echo "Creating intl/ subdirectory" mkdir "$srcdir/intl" \|\| func_fatal_error "failed to create intl/ subdirectory" else echo "Create intl/ subdirectory" fi added_directories="$added_directories intl" fi fi $do_changelog && func_ChangeLog_init for podir in $podirs; do test -d "$srcdir/$podir" \|\| { if $doit; then echo "Creating $podir/ subdirectory" mkdir "$srcdir/$podir" \|\| func_fatal_error "failed to create $podir/ subdirectory" else echo "Create $podir/ subdirectory" fi added_directories="$added_directories $podir" } done # Create the directory for config.rpath, if needed. # This is for consistency with autoreconf and automake. # Note that $auxdir is either empty or ends in a slash. test -d "$srcdir/$auxdir" \|\| { if $doit; then echo "Creating $auxdir subdirectory" mkdir "$srcdir/$auxdir" \|\| func_fatal_error "failed to create $auxdir subdirectory" else echo "Create $auxdir subdirectory" fi } # Now copy all files. Take care for the destination directories. for file in ; do case $file in ABOUT-NLS) func_linkorcopy $file "$gettext_datadir/$file" $file ;; config.rpath) if test -f "$srcdir/$auxdir$file"; then : else added_extradist="$added_extradist $auxdir$file" fi func_linkorcopy $file "$gettext_datadir/$file" "$auxdir$file" ;; esac done # Copy files to intl/ subdirectory. if test -n "$intldir"; then cd intl for file in ; do if test $file != COPYING.LIB-2.0 && test $file != COPYING.LIB-2.1; then if test $file != plural.c; then func_linkorcopy $file "$gettext_datadir/intl/$file" intl/$file else # plural.c is a generated file; it must be copied and touched. func_copy $file intl/$file if $doit; then (sleep 2; touch "$srcdir/intl/$file") & fi fi fi done cd .. else echo "Not copying intl/ directory." # Tell the user what to put into configure.ac, if it is not already there. external= # Need to use func_trace_sed instead of $func_trace, since # AM_GNU_GETTEXT is not a standard Autoconf trace. xargs=`func_trace_sed AM_GNU_GETTEXT "$srcdir/$configure_in"` save_IFS="$IFS"; IFS=: for arg in $xargs; do if test 'external' = "$arg"; then external=yes break fi done IFS="$save_IFS" if test -z "$external"; then please="$please Please use AM_GNU_GETTEXT([external]) in order to cause autoconfiguration to look for an external libintl. " fi fi # Copy files to po/ subdirectory. cd po for podir in $podirs; do $do_changelog && func_poChangeLog_init for file in Makefile.in.in; do same=no if test -f "$srcdir/$podir/$file"; then if cmp -s $file "$srcdir/$podir/$file"; then same=yes fi else added_acoutput="$added_acoutput $podir/Makefile.in" fi if $do_changelog && test $same = no; then if test -f "$srcdir/$podir/$file"; then func_poChangeLog_add_entry " $file: Upgrade to gettext-${version}." else func_poChangeLog_add_entry " * $file: New file, from gettext-${version}." fi fi func_backup "$podir/$file" func_linkorcopy $file "$gettext_datadir/po/$file" "$podir/$file" done for file in ; do case $file in Makefile.in.in) # Already handled above. ;; Makevars.template) func_linkorcopy Makevars.template "$gettext_datadir/po/Makevars.template" "$podir/Makevars.template" if test -f "$srcdir/po/Makevars"; then LC_ALL=C sed -n -e 's/[ ]$[A-Za-z0-9_]$[ ]=./\1/p' < "$srcdir/$podir/Makevars" \| LC_ALL=C sort > "$srcdir/$podir/Makevars.tmp1" LC_ALL=C sed -n -e 's/[ ]$[A-Za-z0-9_]$[ ]=./\1/p' < "$srcdir/$podir/Makevars.template" \| LC_ALL=C sort > "$srcdir/$podir/Makevars.tmp2" missingvars=`LC_ALL=C comm -13 "$srcdir/$podir/Makevars.tmp1" "$srcdir/$podir/Makevars.tmp2"` rm -f "$srcdir/$podir/Makevars.tmp1" "$srcdir/$podir/Makevars.tmp2" if test -n "$missingvars"; then please="$please Please update $podir/Makevars so that it defines all the variables mentioned in $podir/Makevars.template. You can then remove $podir/Makevars.template. " fi else please="$please Please create $podir/Makevars from the template in $podir/Makevars.template. You can then remove $podir/Makevars.template. " fi ;; ) same=no if test -f "$srcdir/$podir/$file"; then if cmp -s $file "$srcdir/$podir/$file"; then same=yes fi fi if $do_changelog && test $same = no; then if test -f "$srcdir/$podir/$file"; then func_poChangeLog_add_entry " * $file: Upgrade to gettext-${version}." else func_poChangeLog_add_entry " * $file: New file, from gettext-${version}." fi fi func_backup "$podir/$file" func_linkorcopy $file "$gettext_datadir/po/$file" "$podir/$file" ;; esac done if test -f "$srcdir/$podir/cat-id-tbl.c"; then func_remove "$podir/cat-id-tbl.c" $do_changelog && func_poChangeLog_add_entry " * cat-id-tbl.c: Remove file." fi if test -f "$srcdir/$podir/stamp-cat-id"; then func_remove "$podir/stamp-cat-id" $do_changelog && func_poChangeLog_add_entry " * stamp-cat-id: Remove file." fi if test ! -f "$srcdir/$podir/POTFILES.in"; then if $doit; then echo "Creating initial $podir/POTFILES.in" echo '# List of source files which contain translatable strings.' > "$srcdir/$podir/POTFILES.in" else echo "Create initial $podir/POTFILES.in" fi $do_changelog && func_poChangeLog_add_entry " * POTFILES.in: New file." please="$please Please fill $podir/POTFILES.in as described in the documentation. " fi $do_changelog && func_poChangeLog_finish done # Determine whether we can assume automake 1.9 or newer. have_automake19= if (aclocal --version) >/dev/null 2>/dev/null; then aclocal_version=`aclocal --version \| sed -n -e 1p \| sed -e 's/^[^0-9]//'` case $aclocal_version in 1.9 \| 1.[1-9][0-9]* \| [2-9]) have_automake19=yes ;; esac fi m4filelist='gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4' # With aclocal versions < 1.9 we need all m4 files, otherwise "aclocal -I m4" # might give an error. (aclocal < 1.9 didn't know which macros are really # needed, it looked which macros are potentially needed.) min_automake_version=1.9 if test -n "$intldir" \|\| test -z "$have_automake19"; then # Add intldir.m4, intl.m4 and its dependencies. m4filelist=$m4filelist' codeset.m4 fcntl-o.m4 glibc2.m4 glibc21.m4 intdiv0.m4 intl.m4 intldir.m4 intlmacosx.m4 intmax.m4 inttypes_h.m4 inttypes-pri.m4 lcmessage.m4 lock.m4 longlong.m4 printf-posix.m4 size_max.m4 stdint_h.m4 threadlib.m4 uintmax_t.m4 visibility.m4 wchar_t.m4 wint_t.m4 xsize.m4' min_automake_version=1.8 fi # All sorts of bugs could occur if the configure file was remade with the wrong # version of gettext.m4 et al. (because then the configure and the po/Makefile.in.in # don't fit together). It is therefore important that the package carries the # right versions of gettext.m4 et al. with it. if test -f "$srcdir/Makefile.am"; then # A package using automake. # Determine whether it's using automake 1.8 or newer. have_automake18= if (aclocal --version) >/dev/null 2>/dev/null; then aclocal_version=`aclocal --version \| sed -n -e 1p \| sed -e 's/^[^0-9]//'` case $aclocal_version in 1.[8-9]* \| 1.[1-9][0-9]* \| [2-9]) have_automake18=yes ;; esac fi if test -z "$m4dir"; then # Extract the macro directory name from Makefile.am. aclocal_amflags=`grep '^ACLOCAL_AMFLAGS[ ]=' "$srcdir/Makefile.am" \| sed -e 's/^ACLOCAL_AMFLAGS[ ]=$.$$/\1/'` m4dir_is_next= for arg in $aclocal_amflags; do if test -n "$m4dir_is_next"; then # Ignore absolute directory pathnames, like /usr/local/share/aclocal. case "$arg" in /) ;; ) test -z "$m4dir" \|\| m4dir="$arg" macrodirs="$macrodirs $arg" ;; esac m4dir_is_next= else if test "X$arg" = "X-I"; then m4dir_is_next=yes else m4dir_is_next= fi fi done for arg in $macrodirs; do m4dir="$arg" break done fi if test -z "$m4dir"; then m4dir=m4 m4dir_defaulted=yes fi # Decide whether to use $m4dir/ChangeLog, or to use ChangeLog instead. if test -d "$srcdir/$m4dir" && test -f "$srcdir/ChangeLog" && test ! -f "$srcdir/$m4dir/ChangeLog"; then # The programmer has no $m4dir/ChangeLog so far. Don't introduce one. using_m4ChangeLog= fi # Update the .m4 files and the corresponding Makefile.am. $do_changelog && func_m4ChangeLog_init added_m4dir= added_m4files= if test -d "$srcdir/$m4dir"; then : else if $doit; then echo "Creating directory $m4dir" mkdir "$srcdir/$m4dir" else echo "Create directory $m4dir" fi added_m4dir=yes fi for file in $m4filelist; do same=no if test -f "$srcdir/$m4dir/$file"; then if cmp -s "/usr/share/aclocal/$file" "$srcdir/$m4dir/$file"; then same=yes fi else added_m4files="$added_m4files $file" fi if $do_changelog && test $same = no; then if test -f "$srcdir/$m4dir/$file"; then func_m4ChangeLog_add_entry " $file: Upgrade to gettext-${version}." else func_m4ChangeLog_add_entry " * $file: New file, from gettext-${version}." fi fi func_backup "$m4dir/$file" func_linkorcopy "/usr/share/aclocal/$file" "/usr/share/aclocal/$file" "$m4dir/$file" done missing_m4Makefileam= if test -n "$added_m4files"; then if test -f "$srcdir/$m4dir/Makefile.am"; then if $doit; then echo "Updating EXTRA_DIST in $m4dir/Makefile.am (backup is in $m4dir/Makefile.am~)" func_backup "$m4dir/Makefile.am" rm -f "$srcdir/$m4dir/Makefile.am" if grep '^EXTRA_DIST[ ]=' "$srcdir/$m4dir/Makefile.am~" > /dev/null; then sed -e "s%^$EXTRA_DIST[ ]=$ \\?%\\1$added_m4files %" < "$srcdir/$m4dir/Makefile.am~" > "$srcdir/$m4dir/Makefile.am" $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): Add the new files." else (cat "$srcdir/$m4dir/Makefile.am~"; echo; echo "EXTRA_DIST =$added_m4files") > "$srcdir/$m4dir/Makefile.am" $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): New variable." fi else echo "Update EXTRA_DIST in $m4dir/Makefile.am" $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST)." fi else # $m4dir/Makefile.am is not needed any more when aclocal 1.8 or newer # is used. if test -z "$have_automake18"; then if $doit; then echo "Creating $m4dir/Makefile.am" echo "EXTRA_DIST =$added_m4files" > "$srcdir/$m4dir/Makefile.am" else echo "Create $m4dir/Makefile.am" fi $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am: New file." added_acoutput="$added_acoutput $m4dir/Makefile" else missing_m4Makefileam=yes fi fi fi if test -n "$added_m4dir" && test -z "$missing_m4Makefileam"; then added_directories="$added_directories $m4dir" fi $do_changelog && func_m4ChangeLog_finish # automake will arrange for $m4dir/ChangeLog to be distributed if a # $m4dir/Makefile.am exists. If not, we need to add it to Makefile.am's # EXTRA_DIST explicitly. if test -n "$created_m4ChangeLog" && test -n "$missing_m4Makefileam"; then added_extradist="$added_extradist $m4dir/ChangeLog" fi # Update the top-level Makefile.am. modified_Makefile_am= # func_modify_Makefile_am changelog_comment # assumes a modified copy of $srcdir/Makefile.am in $srcdir/Makefile.am.tmp # and replaces the original Makefile.am file with the modified one if # the two files differ. Then it removes the modified copy. func_modify_Makefile_am () { if cmp -s "$srcdir/Makefile.am" "$srcdir/Makefile.am.tmp"; then : else if test -z "$modified_Makefile_am"; then if $doit; then echo "Updating Makefile.am (backup is in Makefile.am~)" func_backup Makefile.am else echo "Update Makefile.am" fi fi if $doit; then rm -f "$srcdir/Makefile.am" cp "$srcdir/Makefile.am.tmp" "$srcdir/Makefile.am" fi if $do_changelog; then if test -z "$modified_Makefile_am"; then func_ChangeLog_add_entry " * Makefile.am $1" else func_ChangeLog_add_entry " $1" fi fi modified_Makefile_am=yes fi rm -f "$srcdir/Makefile.am.tmp" } if test -n "$added_directories"; then if grep '^SUBDIRS[ ]=' "$srcdir/Makefile.am" > /dev/null; then sed -e "s%^$SUBDIRS[ ]=$ \\?%\\1$added_directories %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" added_directories_pretty=`echo $added_directories \| sed -e 's/ /, /g'` func_modify_Makefile_am "(SUBDIRS): Add $added_directories_pretty." else (cat "$srcdir/Makefile.am"; echo; echo "SUBDIRS =$added_directories") > "$srcdir/Makefile.am.tmp" func_modify_Makefile_am "(SUBDIRS): New variable." fi fi if test -n "$removed_directory"; then sed -e '/^SUBDIRS[ ]=/ { :a s%$[ ]$'"$removed_directory"'[ ]%\1% s%[ ]'"$removed_directory"'$%% tb :b s%\\$%\\% tc bd :c n ba :d }' < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" func_modify_Makefile_am "(SUBDIRS): Remove $removed_directory." fi if test -n "$added_directories"; then if grep '^DIST_SUBDIRS[ ]=' "$srcdir/Makefile.am" > /dev/null; then sed -e "s%^$DIST_SUBDIRS[ ]=$ \\?%\\1$added_directories %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" added_directories_pretty=`echo $added_directories \| sed -e 's/ /, /g'` func_modify_Makefile_am "(DIST_SUBDIRS): Add $added_directories_pretty." fi fi if test -n "$removed_directory"; then sed -e '/^DIST_SUBDIRS[ ]=/ { :a s%$[ ]$'"$removed_directory"'[ ]%\1% s%[ ]'"$removed_directory"'$%% tb :b s%\\$%\\% tc bd :c n ba :d }' < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" func_modify_Makefile_am "(DIST_SUBDIRS): Remove $removed_directory." fi if test -n "$m4dir_defaulted"; then if grep '^ACLOCAL_AMFLAGS[ ]=' "$srcdir/Makefile.am" > /dev/null; then sed -e "s%^$ACLOCAL_AMFLAGS[ ]=$ \\?%\\1 -I $m4dir %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" func_modify_Makefile_am "(ACLOCAL_AMFLAGS): Add -I $m4dir." else (cat "$srcdir/Makefile.am"; echo; echo "ACLOCAL_AMFLAGS = -I $m4dir") > "$srcdir/Makefile.am.tmp" func_modify_Makefile_am "(ACLOCAL_AMFLAGS): New variable." fi # Also update Makefile.in and, if existent, Makefile. Otherwise they # would take into account the new flags only after a few rounds of # "./configure", "make", "touch configure.in", "make distclean". if $doit; then for file in Makefile.in Makefile; do if test -f "$srcdir/$file"; then func_backup $file rm -f "$srcdir/$file" sed -e "s%(ACLOCAL)%(ACLOCAL) -I $m4dir%" < "$srcdir/$file~" > "$srcdir/$file" fi done fi fi if test -n "$added_extradist"; then if grep '^EXTRA_DIST[ ]=' "$srcdir/Makefile.am" > /dev/null; then sed -e "s%^$EXTRA_DIST[ ]=$%\\1$added_extradist %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" added_extradist_pretty=`echo $added_extradist \| sed -e 's/ /, /g'` func_modify_Makefile_am "(EXTRA_DIST): Add $added_extradist_pretty." else (cat "$srcdir/Makefile.am"; echo; echo "EXTRA_DIST =$added_extradist") > "$srcdir/Makefile.am.tmp" func_modify_Makefile_am "(EXTRA_DIST): New variable." fi fi # Extract the aclocal options name from Makefile.am. aclocal_options= for arg in $macrodirs; do aclocal_options="$aclocal_options -I $arg" done please="$please Please run 'aclocal$aclocal_options' to regenerate the aclocal.m4 file. You need aclocal from GNU automake $min_automake_version (or newer) to do this. Then run 'autoconf' to regenerate the configure file. " # Also create $m4dir/Makefile.in from $m4dir/Makefile.am, because automake # doesn't do it by itself. if $doit; then case "$added_acoutput" in " $m4dir/Makefile") (cd "$srcdir" && automake "$m4dir/Makefile") 2>/dev/null \|\| please="$please Please run 'automake $m4dir/Makefile' to create $m4dir/Makefile.in " ;; esac fi else please="$please Please add the files $m4filelist from the /usr/share/aclocal directory to your aclocal.m4 file. " fi modified_configure_in= # func_modify_configure_in changelog_comment # assumes a modified copy of $srcdir/$configure_in in $srcdir/$configure_in.tmp # and replaces the original configure.in/ac file with the modified one if # the two files differ. Then it removes the modified copy. func_modify_configure_in () { if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then : else if test -z "$modified_configure_in"; then if $doit; then echo "Updating $configure_in (backup is in $configure_in~)" func_backup $configure_in else echo "Update $configure_in" fi fi if $doit; then rm -f "$srcdir/$configure_in" cp "$srcdir/$configure_in.tmp" "$srcdir/$configure_in" fi if $do_changelog; then if test -z "$modified_configure_in"; then func_ChangeLog_add_entry " $configure_in $1" else func_ChangeLog_add_entry " $1" fi fi modified_configure_in=yes fi rm -f "$srcdir/$configure_in.tmp" } if test -n "$added_acoutput"; then if grep '^AC_CONFIG_FILES(' "$srcdir/$configure_in" > /dev/null; then sedprog=' ta b :a n ba' sed -e "s%^\$AC_CONFIG_FILES([^])\\,]\$%\\1$added_acoutput%$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" added_acoutput_pretty=`echo $added_acoutput \| sed -e 's/ /, /g'` func_modify_configure_in "(AC_CONFIG_FILES): Add $added_acoutput_pretty." else if grep '^AC_OUTPUT(' "$srcdir/$configure_in" > /dev/null; then sed -e "s%^\$AC_OUTPUT([^])\\,]\$%\\1$added_acoutput%" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" added_acoutput_pretty=`echo $added_acoutput \| sed -e 's/ /, /g'` func_modify_configure_in "(AC_OUTPUT): Add $added_acoutput_pretty." else please="$please Please add$added_acoutput to the AC_OUTPUT or AC_CONFIG_FILES invocation in the $configure_in file. " fi fi fi if test -n "$removed_acoutput"; then for file in $removed_acoutput; do tag= sedprog='{ s%$[[ ]$'"$file"'[ ]%\1% s%$[[ ]$'"$file"'$[]),]$%\1\2% s%[[ ]'"$file"'$%% :a tb :b s%\\$%\\% tc bd :c n s%$[ ]$'"$file"'[ ]%\1% s%$[ ]$'"$file"'$[]),]$%\1\2% s%[ ]'"$file"'$%% ba :d }' sed -e '/^AC_CONFIG_FILES(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then sed -e '/^AC_OUTPUT(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then : else tag=AC_OUTPUT fi else tag=AC_CONFIG_FILES fi if test -n "$tag"; then func_modify_configure_in "($tag): Remove $file." else rm -f "$srcdir/$configure_in.tmp" if test "$file" != intl/intlh.inst; then please="$please Please remove $file from the AC_OUTPUT or AC_CONFIG_FILES invocation in the $configure_in file. " fi fi done fi sed -e 's%sed -e "/POTFILES =/r po/POTFILES" po/Makefile\.in > po/Makefile ; %%' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" func_modify_configure_in "(AC_OUTPUT): Remove command that created po/Makefile." sed -e '/^$dnl \\|$AC_LINK_FILES(\$nls_cv_header_libgt, \$nls_cv_header_intl)$/d' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" func_modify_configure_in "(AC_LINK_FILES): Remove invocation." # AM_GNU_GETTEXT_VERSION may not be present, when AM_GNU_GETTEXT_REQUIRE_VERSION is used. if grep '^AM_GNU_GETTEXT_VERSION(' "$srcdir/$configure_in" 2>&1 >/dev/null; then sed -e 's/^AM_GNU_GETTEXT_VERSION([^()])/AM_GNU_GETTEXT_VERSION(['"$archive_version"'])/' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" func_modify_configure_in "(AM_GNU_GETTEXT_VERSION): Bump to $archive_version." fi $do_changelog && func_ChangeLog_finish # Recommend replacement for deprecated Makefile variables. use_libtool=`cat "$srcdir/$configure_in" \| grep '^A[CM]_PROG_LIBTOOL'` for file in `(cd "$srcdir"; find . -name Makefile.am -print; find . -name Makefile.in -print) \| sed -e 's,^\./,,'`; do if test -f "$srcdir/$file"; then if test `echo "$file" \| sed -e 's,^./,,'` = Makefile.in && grep automake "$srcdir/$file" >/dev/null 2>&1; then continue; fi # INTLLIBS is deprecated because it doesn't distinguish the two # cases: with libtool, without libtool. if grep '@''INTLLIBS''@' "$srcdir/$file" >/dev/null 2>&1; then if test -n "$use_libtool"; then please="$please Please change $file to use @""LTLIBINTL""@ or @""LIBINTL""@ instead of @""INTLLIBS""@. Which one, depends whether it is used with libtool or not. @""INTLLIBS""@ will go away. " else please="$please Please change $file to use @""LIBINTL""@ instead of @""INTLLIBS""@. @""INTLLIBS""@ will go away. " fi fi # DATADIRNAME is deprecated because we install only .gmo files nowadays, # which can be stored in the platform independent $prefix/share hierarchy. if grep '@''DATADIRNAME''@' "$srcdir/$file" >/dev/null 2>&1; then please="$please Please change $file to use the constant string \"share\" instead of @""DATADIRNAME""@. @""DATADIRNAME""@ will go away. " fi # INSTOBJEXT is deprecated because we install only .gmo files nowadays, # no catgets .cat catalogs. if grep '@''INSTOBJEXT''@' "$srcdir/$file" >/dev/null 2>&1; then please="$please Please change $file to use the constant string \".mo\" instead of @""INSTOBJEXT""@. @""INSTOBJEXT""@ will go away. " fi # GENCAT is deprecated because we install no catgets catalogs anymore. if grep '@''GENCAT''@' "$srcdir/$file" >/dev/null 2>&1; then please="$please Please change $file to use the constant string \"gencat\" instead of @""GENCAT""@. @""GENCAT""@ will go away. Maybe you don't even need it any more? " fi # POSUB is deprecated because it causes "./configure --disable-nls", "make", # "make dist" to create a buggy tarfile. if grep '@''POSUB''@' "$srcdir/$file" >/dev/null 2>&1; then please="$please Please change $file to use the constant string \"po\" instead of @""POSUB""@. @""POSUB""@ will go away. " fi fi done # Recommend replacement for deprecated configure variables. if grep '\$nls_cv_header_' "$srcdir/$configure_in" >/dev/null 2>&1; then please="$please Please stop using \$nls_cv_header_intl or \$nls_cv_header_libgt in the $configure_in file. Both will go away. Use <libintl.h> or \"gettext.h\" instead. " fi # Recommend fetching config.guess and config.sub. if test -f "$srcdir/$auxdir"config.guess && test -f "$srcdir/$auxdir"config.sub; then : else please="$please You will also need config.guess and config.sub, which you can get from the CVS of the 'config' project at http://savannah.gnu.org/. The commands to fetch them are \$ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/checkout/config/config/config.guess' \$ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/checkout/config/config/config.sub' " fi if $doit; then echo "$please" echo "You might also want to copy the convenience header file gettext.h" echo "from the $gettext_datadir directory into your package." echo "It is a wrapper around <libintl.h> that implements the configure --disable-nls" echo "option." echo count=`echo "$please" \| grep '^$' \| wc -l` count=`echo "$count" \| sed -e 's/[ ]//g'` case "$count" in 1) count="paragraph";; 2) count="two paragraphs";; 3) count="three paragraphs";; 4) count="four paragraphs";; 5) count="five paragraphs";; ) count="$count paragraphs";; esac echo "Press Return to acknowledge the previous $count." # Read from /dev/tty, not stdin, so that gettextize cannot be abused by # non-interactive tools. read dummy < /dev/tty fi exit 0

| ver. 1.4 | Github | . | PHP 7.4.33 | Генерация страницы: 0.1 | proxy | phpinfo | Настройка